Welcome to discuss your project requirements.

The key points of daily maintenance of rice husk carbonization machine

 The stable operation of rice husk carbonization machine is highly dependent on scientific daily maintenance. As a high-temperature continuous operation equipment, lubrication system, sealing performance and temperature monitoring are the three pillars to ensure its life and efficiency.

 

Lubrication management is the first priority. The bearing bears the entire load of the equipment, and high-temperature resistant clean lubricating oil (such as lithium-based grease) must be selected. Check whether the oil filling point is unobstructed before starting the machine every day, focusing on rotating bearings, gear tooth surfaces and sliding guides2. If the bearing temperature rises abnormally during operation (exceeding 80°C), the machine should be stopped immediately to check for impurity intrusion or oil deterioration23.

稻壳.jpg

Sealing is directly related to production safety and environmental protection. It is necessary to check whether the sealing gaskets of the furnace door and flue gas duct interface are aging every day, especially the high-temperature carbonization section (500-800°C), which is easy to cause the sealant to carbonize and fail, causing oxygen infiltration or combustible gas leakage14. It is recommended to use graphite composite gaskets and regularly pressurize the airtightness to ensure the stability of the oxygen-free carbonization environment.

 

Temperature monitoring is the key to process stability. The operator should record the temperature curve of each section in the furnace every 2 hours and compare the deviation of the set value. If the temperature fluctuation of the inner cylinder pre-carbonization zone (350-450℃) is greater than ±15℃, it is necessary to check the blockage of the spiral feed or the uneven air distribution of the burner to avoid uneven carbonization of the material47.

 

Daily lubrication inspection, sealing test and temperature tracking can prevent 80% of sudden failures and are the cornerstone of efficient operation of the carbonizer.

COMPANY NEWS

More

LEAVE US A MESSAGE

Old Customer Message
  • James**** 2025-11-03

    We want to make Biochar using coconut husk, startup with small scale industry. Advice and training. Cost of the machine and all other associate equipment.

  • Muke**** 2025-10-31

    1. More information on making Charcoal out of sawdust 2. The price of the machine 3. How long does it take to be deliver the machine 4. It requires how much space. 5. How many people required to run the machine.

  • Srini**** 2025-10-25

    I'm looking for a wooden Charcoal processing machine. Kindly advise me accordingly. Looking forward to make business with you.

  • Pilave**** 2025-10-11

    We need a line for block Charcoal. Please share complete details along with the layout and price. Capacity: 10/t Charcoal per day.

  • Mitun**** 2025-09-29

    How to set up a Charcoal production manufacturing plant. Please provide details of prices , production plant details and your services.

  • Sushi**** 2025-09-18

    Model number 1000 , with project Report sizes of the plot required with power consumption and required power to start the plant

  • Dr.balm**** 2025-08-31

    Looking for a complete sawdust to charcoal briquette line. Quote for machine price, delivery time to Ghana, power consumption, and required floor space.

  • Sanje**** 2025-08-20

    Inquiry about charcoal briquette machine for making hexagonal coal balls. Share machine price, production capacity per hour, and warranty terms. Can you send proforma invoice for CIF Mumbai?

  • vishal**** 2025-08-12

    Need continuous carbonization furnace for coconut shell & wood chips. Capacity: 5 tons/day.

  • Rhoda**** 2025-08-08

    Looking for a biochar reactor for rice husk. Our main concern is electricity consumption and continuous operation ability. Please specify the power (in kW) of your system and the expected biochar output per kg of raw material.

  • Praful**** 2025-07-28

    Interested in an environmentally friendly biochar machine for wood chips. The system must have smoke scrubbers to meet EU emissions standards. Provide details on the pollution control system and its cost.

  • BIKASH**** 2025-07-20

    For a municipal green waste recycling project, we require a large-capacity biochar production plant. Need a detailed project report, EPC solution, and long-term technical support agreement. Please arrange an online meeting.

  • Nkame**** 2025-07-13

    I have a large farm with abundant palm waste. Need a simple, durable biochar kiln that 2-3 workers can operate. Training video and manual in Spanish are necessary. What is the delivery time to Brazil?

  • Gupta**** 2025-07-03

    We need a mobile biochar unit on a trailer for processing forestry residues on-site. Please send information on your mobile models, their setup requirements, and a price range.

  • Adity**** 2025-06-30

    We want to test making biochar from sewage sludge. Do you have a machine suitable for this high-moisture material? We need a pre-dryer and a pilot system quotation. Can you process a sample of our sludge?

  • Morio**** 2025-05-23

    Comparing continuous vs batch type biochar reactors for our farm cooperative.

  • Esteb**** 2025-05-19

    We require a high-temperature carbonization furnace capable of reaching 800°C+ for producing high-grade biochar from hardwood. Specific focus on furnace lining durability and thermal efficiency. Quote requested.

  • ARGOP**** 2025-03-21

    Our city council is seeking a biochar solution for park and garden waste. Need a medium-capacity system with low noise and emissions for urban setting. Full project proposal with operational cost analysis is required.

  • Palitha**** 2025-02-15

    We are a small startup in Uganda. Need the most affordable, functional biochar kiln for coffee husks. Even used or refurbished equipment considered. Payment in installments possible?